Views: 60 Author: Site Editor Publish Time: 2021-01-07 Origin: Site
Workpiece | Engine Block-End Face |
Material | Gray Cast Iron |
Hardness | HB180-250 |
Machining type | Interrupted，Roughing Milling |
CBN Insert | SNGN120412 MRN350 |
Cutting Type | Dry Cutting |
Cutting Parameter | Vc:800-1000/min Ap:2-3mm Fn:0.1-0.15mm/r |
Workpiece | Engine Block-End Face |
Material | Gray Cast Iron |
Hardness | HB180-250 |
Machining type | Interrupted，Finishing Milling |
CBN Insert | SNGN090308 MRN350 |
Cutting Type | Dry Cutting |
Cutting Parameter | Vc:1200-1500/min Ap:0.4-06mm Fn:0.08-0.12mm/r |
Workpiece | Engine Block-Cylinder |
Material | Gray Cast Iron |
Hardness | HB180-250 |
Machining type | Boring, Semi-finishing, Finishing |
CBN Insert | HX10 MRK850 |
Cutting Type | Dry Cutting |
Cutting Parameter | Vc:400-600/min Ap:0.3-0.5mm F:0.1mm/r |
